Is Replit free to deploy? Only in a limited way. The free Starter plan lets you publish one app at no cost, with a "Made with Replit" badge, and that published link goes down automatically after 30 days (you can publish it again). Anything more permanent, a second app, or a custom domain you buy runs on credits: Autoscale apps cost a $2 monthly base fee plus usage, Reserved VMs start at $15 a month, and the $20 Core plan's monthly credits cover these before you pay anything extra.
This guide is about the bill after you press Publish. For the build side (modes, Plan Mode, prompts and checkpoints), see our walkthrough on how to use Replit Agent, or our guide to using Replit as an IDE if you code by hand. We wrote it from Replit's own documentation and pricing pages as checked on November 12, 2026, without a paid account, so the dollar examples below are our arithmetic from published rates, not a measured invoice.
Is Replit free to deploy on the Starter plan?
Yes, for one app at a time. According to Replit's Starter plan page, a free account gets:
- One free published app. It works whether you built it with Lite build (the Starter version of Agent) or Design Canvas. The published link "will automatically go down after 30 days," and you can publish it again.
- A "Made with Replit" badge on the published app, carrying your referral link. Removing it requires Core.
- Monthly credits for cloud usage that Replit says can pay for production databases, object storage and publishing on Autoscale or Static. The page does not state a dollar amount, so check your own Usage page rather than assuming a figure.
- A 1 GiB cap on each production database, compared with 100 GiB on paid plans, per the publishing and database billing docs.
What Starter cannot do matters just as much: a second published app, Full build, connectors to services like Stripe or Google, and Plan Mode all require Core. So the free route is fine for a demo, a class project or a link you share with friends for a few weeks. It is not a free host for something people depend on, because the 30 day expiry means you have to remember to republish.
What does Replit charge to deploy an app?
Every paid publishing cost comes out of your monthly credits first. You pay extra only after those credits are used up. The rates below are from Replit's publishing costs page:
| Deployment type | What you pay | Good fit |
|---|---|---|
| Autoscale | $2 base fee a month, $0.60 per million compute units, $0.40 per million requests | Web apps and APIs with uneven traffic |
| Static | Hosting free, $0.05 per GB of data transfer | Landing pages, portfolios, docs with no backend |
| Reserved VM (shared) | $15 a month for 0.5 vCPU and 2 GB RAM | Bots and always on servers |
| Reserved VM (dedicated) | $35 (1 vCPU, 4 GB), $50 (2 vCPU, 8 GB), $130 (4 vCPU, 16 GB) a month | Steady production traffic |
| Scheduled | $2 base fee a month, $0.60 per million compute units, scheduler free | Cron style jobs like reports and backups |
Compute units are how Replit meters CPU and memory: one CPU second is 18 units and one GB second of memory is 2 units. Outbound data transfer is billed per byte beyond your allowance (Core includes 100 GiB a month), and incoming data is always free.
Replit's own examples put a small business site at 75,000 requests a month at about $2.39 in total, and an API serving 300,000 requests a month at about $4.50. Both are mostly the $2 base fee, which is the main thing to understand about Autoscale: an idle app costs very little, but each published Autoscale app carries that base fee.
Why most Agent apps cannot use the free Static option
Static hosting is the only type with no base fee, so it looks like the obvious free choice. The catch is in Replit's deployment types page: Static Deployments are not compatible with apps created by Agent. Agent builds full stack apps that need a backend server, so those apps publish on Autoscale (the default Replit recommends) or Reserved VM.
Static still works if you write a plain HTML, CSS and JavaScript site yourself in the workspace, point Replit at the public folder, and pick Static in the Deployment type dropdown under Adjust settings. For a prompt built app with a database or login, plan on Autoscale.
How much does an always on Replit app cost?
Autoscale scales to zero. The pricing page explains that an idle app starts when the first request arrives, processes requests, and goes idle again after 15 minutes without traffic, and you are billed for CPU and memory only while requests are being processed. That is why low traffic sites cost close to the base fee.
If your app has to stay connected all the time (a Discord or Telegram bot, a websocket server, a worker that polls a queue), use a Reserved VM instead. It never sleeps and costs a fixed monthly price, starting at $15 for the shared machine.
A rough way to compare the two, using the published rates: one fully busy vCPU for an hour is 64,800 compute units, and 2 GB of memory for an hour is another 14,400 units. At $0.60 per million units that is about $0.05 an hour, or roughly $35 for a month of nonstop work on Autoscale before the base fee and request charges. So if your app is genuinely busy around the clock, the $15 or $35 Reserved VM is cheaper and more predictable. If it sits idle most of the day, Autoscale wins. The machine configuration page also lets you set Max machines on Autoscale, which caps how far it can scale and so caps your worst hour.
Do Core credits make deployment free?
Partly. Core costs $20 a month, or $18 a month billed annually, per the Replit pricing page, and its credits apply automatically to Agent, publishing, network transfer, database storage and Replit AI Integrations, according to the Replit Core docs. Core also lifts the cap to unlimited published apps and removes the badge.
The practical question is how much of the $20 Agent eats before publishing gets a share. Two small Autoscale apps cost $4 a month in base fees plus a little usage, which fits comfortably in the credit if you build mostly in Free Mode. If you spend the credit on paid Agent modes, publishing costs flow into pay as you go billing. Replit's docs say unused monthly credits do not roll over on Core, so the credit is use it or lose it.
What a custom domain costs
The free address is a .replit.app subdomain, with TLS certificates provided by Replit at no cost. A custom domain is priced by whoever sells it, per the custom domains docs. You can connect a domain you already own, or buy one inside Replit, in which case you pay a registration fee for the first year (two years for .ai) and the renewal price is charged automatically. WHOIS privacy is included. Two setup details catch people: www is a separate subdomain you have to add on its own, and the replit-verify TXT record must stay in your DNS permanently or certificate renewal fails.
How to keep a Replit deployment from costing more than you expect
- Set a usage limit. On Core, open Usage in Settings and select Manage limits. When you reach the limit, usage based services are blocked until the next cycle or until you raise it. The managing spend docs also describe a service shutdown limit that suspends services instead of billing more.
- Check the Usage page weekly. It updates in near real time and can be filtered by project and resource, so you can see which published app is driving cost.
- Unpublish what you no longer need. Each Autoscale or Scheduled deployment carries the $2 base fee.
- Cap Max machines on Autoscale so a traffic spike cannot scale without limit.
- Watch auto reload. If you buy credit packs and turn on auto reload, Replit buys a new pack when your balance runs low. Credit packs expire six months after purchase.
Free alternatives if you only need hosting
If the reason you are asking is that you want permanent free hosting, the honest answer is that Replit is not built for that. You can push your code to GitHub from the workspace and host it elsewhere. Two common free tiers, with their own catches: Render's free web services spin down after 15 minutes without traffic and get 750 free instance hours a month per workspace, and its free Postgres databases expire 30 days after creation. Vercel's Hobby plan is free but limited to non commercial, personal use. Neither includes an app building agent, so you trade Replit's one click publish for more setup. Browser builders such as Lovable have their own publishing rules, and local coding agents like Claude Code or editors like Cursor leave hosting entirely to you; our best AI coding assistant guide compares those options, and what agentic coding is explains how the two styles differ.
FAQ
Is Replit free to host a website forever?
No. The Starter plan's one free published app goes down after 30 days, and you have to publish it again to bring it back. Permanent hosting means a paid plan or paying for usage beyond your credits.
Do I need a credit card to publish on Replit?
Replit's docs do not list a card as a requirement for the free Starter app. Its publishing overview says that if an "Add a payment method" prompt appears in the Publishing tool, you follow it before you can publish. Paid plans and pay as you go usage need a payment method on file.
Where are Replit apps hosted?
Replit says its infrastructure runs on Google Cloud Platform and that published apps are hosted in the United States, with each customer getting a dedicated, single tenant cloud project. Enterprise customers can ask for European Union hosting.
Does Replit charge for the development database?
No. Development databases are free and included with every app. Only production databases are billed, by compute time (active while receiving requests plus five minutes) and storage.
Is Replit Agent itself free?
Starter includes Agent chat in Free Mode with a daily cap, and Core and Pro include a larger Free Mode allowance plus credits for paid modes. Our guide on how to use Replit Agent covers the modes and how to keep build costs down.

